ResinMix 3C

ResinMix 3C Overview

The ResinMix has been developed at a 3 component version to enable companies to process a resin with 2 different hardeners. This allows the system to dispense a mixed material with a specific open time to suit the application criteria.
The metering is carried out by individually driven, axial piston pumps with the materials supplied by bulk containers.
Flowmeters ensure the mix entered is controlled & maintained and this is over seen by the 2KM control system based on either our own microprocessor of a Siemens PLC.

Metering technology Direct coupling of inverter controlled, geared AC motors directly coupled to variable displacement axial piston pumps. 1 x Resin 2 x Hardener
Ratio range 10:10:100 through 100:100:100 to 100:10:10
Output (depending on Viscosity) 20,000 cc per minute
Viscosity range Up to 2,000 cps (processing viscosity)
Maximum operating pressures 260 bar at pump outlet
Mixing options Disposable static mixers
Metering control By in line gear type flowmeters
Control systems 2KM Microprocessor controller or Siemens s7-300 system. Both with touch screen operator interface
Services 3 phase +N +E 32 Amp
Pneumatic 20mm 6 bar for pump supply
Options available Diaphragm pump supply from IBC or 205 litre drums
Supply drum low level
Intermediate conditioning vessels
In line heating
In line degassing
Large vessels 2500 litre available
Impingement mixing for spray application
Area of application Industry Process
Composites Wind Energy Infusion of blade shells
Infusion of moulds
  Marine Infusion of large structures
Typical materials processed:
Epoxy